Log Data - Quest Controls TELSEC MP1 User Manual

6.6 Log Data

The MP1 will plot a graph of up to four points at a time. The page controls will allow the user to select
from Analog Inputs, Digital Inputs and Digital Outputs. Any combination of point types can be charted at
one time. Select the point to be graphed and then select the date range for the data. If no date range is
specified, then the system will display the most recent data for the points when clicking on the
Regenerate Graph button. The "Point name match string" field can be used to only show points that
contains those characters. For example you could type Zone in the point name match field and the
system will only display analog inputs with value of Zone in the name.
Figure 17 - Select Data Point to be Graphed
The system will display the graph with a default view of the last 24 hours. Use the page buttons and
zoom in and out icons to view the data in your web browser. The MP1 will display a Download to CSV
button which will download the data in a CSV file for viewing in another program. Note the download
will be the most current 4095 entries per point when no time range was selected. If a large time range
was selected, then the system will return the last 4095 entries per point for the range.
Figure 18 - Graph of Selected Data Points
©
Rev 3.0 9/15/22 - 17 - TELSEC MP1 User Guide