Alarm Dispatch Settings - Quest Controls TELSEC MP1 User Manual

Figure 31 - Telnet/SSH User Configuration

8.2 Alarm Dispatch Settings

The Alarms Dispatch option under the Settings menu will display the current settings for both the SNMP
dispatch and Email dispatching of alarms.
8.2.1 SNMP Dispatch
The MP1 supports sending SNMP traps or Informs (v2c or v3 only) to four trap servers. Enter the IP
address of the trap server and select the SNMP version and either Trap or Inform. Some trap servers
require a specific Community String to be used, but if not, use the value of Trap which is the default. For
SNMPv3, you will need to use one of the defined Usernames that was created during the configuration
of SNMPv3 (section 8.1.7). Press the "Save Settings" button to save your changes. Note: if you are also
using Email dispatching, then make those entries first prior to pressing the "Save Settings" button
(section 8.2.2).
©
Rev 3.0 9/15/22 - 26 - TELSEC MP1 User Guide