Advanced Settings - Quest Controls TELSEC MP1 User Manual

8.4 Advanced Settings

8.4.1 System Version & Update
Choosing the Advanced settings will display the current version of the system's firmware. Selecting the
Update button will cause the system to try and connect to an update server to look for upgrades. The IP
address used for upgrades must be accessible from the network the MP1 is on in order to perform the
upgrade. The IP address for the upgrade server is configured in the IP General window. See section
8.1.4.
8.4.2 Configuration Upload & Download
Select the expand arrow to display the option for downloading or uploading a configuration file to the
system. The download option will download a text file to your web browser. The file will have all of the
current settings configured in the system. This file can then be saved in case the site needs to be
uploaded in the future. The Upload option will allow you to load a configuration file to the system.
While the system will download all settings into a single file, it will accept uploading files with individual
sections. This way you can upload only the sections requiring changes. Each section has a label in
brackets [] to denote the section. The entire section must be loaded together to be successful.
Rev 3.0 9/15/22
Figure 35 - Webserver Password Setup
Figure 36 - Firmware Version and Update
- 29 -
©
TELSEC MP1 User Guide