Quest Controls TELSEC MP1 User Manual page 27

Figure 25 - IPv6 Settings
8.1.4 IP General
This section is used to enter the DNS server IP addresses, change the default IP ports, enable/disable SSL
and configure the location of where the update server is located. The Telnet and SSH ports are used for
Transaction Language 1 (TL1) alarming and access to the management shell. See section 8.1.9 for
configuring usernames and passwords. The TL1 port is a read only access that uses Telnet and does not
require a login sequence. Changing the port number to 0 for Telnet, TL1 Port or SSH will disable access
to that function.
When selecting SSL, the system will allow you to copy/paste the contents of your own PEM data file if
you have one. The system will create a self-certification If PEM data is not entered. Self-certification
will allow HTTPS connection, but your browser will generate an error notice and ask you if you want to
continue. The update server section is used to identify where to look for updates when a user presses
the Check and Install Updates button found on the Settings/Advanced page. It is recommended that
this field is not changed unless you know the IP address and path for update files.
Figure 26 - Additional Network Settings
©
Rev 3.0 9/15/22 - 22 - TELSEC MP1 User Guide