will be the number 4 plus the decimal value for each character. For example, an alarm ID of a001 will
have an ACII table index of a001 or the decimal value of 4.97.48.48.49. The table has the following
objects available:
Object
Active alarm point name
Active alarm point timestamp
Active alarm point severity
Active alarm point input name
Active alarm point string value
12.6 Scalar values
This section of the MIB contains the firmware version for the system. This is a string value that will
contain the current firmware version of the system.
Rev 3.0 9/15/22
The defined 32-character name for the alarm.
The time when the point went into the active condition.
The defined alarm severity for the alarm.
The name of the input or point that is used to determine the alarm condition.
A string value showing the status of the point in alarm.
- 52 -
Description
TELSEC
©
MP1 User Guide