Quest Controls TELSEC MP1 User Manual page 32

Figure 32 - SNMP Trap/Inform Configuration
8.2.2 Email Dispatch
Click on the Email Dispatch expand icon to display the settings for creating email distribution. The Email
server settings must be configured for email alarming to occur (See section 8.1.6). The MP1 supports
nine email addresses for sending alarms. Enter the users email address or distribution list address to be
used. The subject field allows for a custom message to be included with the email. The system will
create a subject line with the severity of the alarm followed by the text entered in the subject field. The
last column allows for filtering of what type of alarms to be sent. The system will automatically send a
clear email when the alarm condition clears. For example, if only Critical alarms are sent via email then
the Clear for those critical alarms will be sent.
Figure 33 - Email Alarm Dispatch
©
Rev 3.0 9/15/22 - 27 - TELSEC MP1 User Guide