Quest Controls TELSEC MP1 User Manual page 35

First select the Choose File button to navigate and select a file from your computer. Then select the
Upload button. The system will receive the file and then verify the information to ensure it conforms to
the proper syntax. The system will then present a dialogue box displaying any errors with their line
number or a notice of no errors. If there are no errors, then there will be a Save and Reboot button
below the dialogue box. Pressing this button will cause the system to save the contents of the
configuration file to flash and then reboot and come back up with the new settings.
8.4.3 Point Log Removal
This section will allow clearing of log data for a single point or erasing history log data for all the points.
It is not necessary to periodically remove log data since the system will overwrite old data when the log
is full. Typically, the manual clearing of logs might be done after the system is properly wired and
configured to eliminate erroneous data that could have occurred during installation.
8.4.4 Clear Input Timers
This option will clear all digital input timers at one time. The system will provide a confirmation popup
and then proceed to reset the timers to zero if the user confirms the operation.
Rev 3.0 9/15/22
Figure 37 - Configuration File Upload & Download
Figure 38 - Remove Log Data
- 30 -
©
TELSEC MP1 User Guide