Rt-Msr810-Lms/Rt-Msr810-Lms-Ea/Rt-Msr810-Lus; Led Description - H3C MSR810 Installation Manual

RT-MSR810-LMS/RT-MSR810-LMS-EA/RT-MSR810-LUS

Figure 65 Front panel LEDs
(1) System status LED (SYS)
(4) SIM1 slot LED

LED description

LED
System status LED
(SYS)
VPN status LED (VPN)
GE port green LED
and GE port yellow
LED
FE port LED (FE0
through FE3)
(2) VPN status LED
(5) Signal strength LED
Status
Steady green
Flashing green (8 Hz)
Flashing green (1 Hz)
Flashing yellow (1 Hz)
Flashing yellow (8 Hz)
Steady yellow
Off
Steady on
Off
Steady green
Flashing green
Steady yellow
Flashing yellow
Both LEDs off
Steady green
Flashing green
Off
56
(3) SIM0 slot LED
(6) FE port LEDs (FE0 through FE3)
Description
The SDRAM is performing self-test.
The system software image is being copied and
decompressed.
Comware has started with the configuration file and
the router has booted up.
The SDRAM has failed the self-test.
The extended segment does not exist.
The system software image does not exist.
No power input, or exceptions have occurred.
A minimum of one IPSec VPN tunnel is present.
No IPSec VPN tunnel is present.
A 1000 Mbps link is present.
Data is being received or transmitted at 1000 Mbps.
A 10/100 Mbps link is present.
Data is being received or transmitted at 10/100 Mbps.
No link is present.
A 10/100 Mbps link is present.
Data is being received or transmitted at 10/100 Mbps.
No link is present.