Channel Scanner Setup - Keysight Technologies N9321C User Manual

Functions and Measurements
Channel Scanner

Channel Scanner Setup

To customized the channel scan process, you can press Meas >
Channel Scanner > Setup to set the measurement interval and rule
in the submenu.
The Meas Interval is a value of time/distance during which the
every two scan process is triggered. When it is set to off, the
channel will be scanned with default settings.
The Interval Type is toggled between time and distance. When it is
set to Time, the minimum interval time is 100 ms. When it is set to
Distance, it allows you to measure the channel with the specific
distance on the road test. The minimum interval distance is 1
meter.
The Measure Rule and Search Rule is toggled between Speed and
Accuracy.
For each scan process, the analyzer will first search and find out
the available channels according to the selected scan mode. Then,
a precise measurement will perform to get the scan result.
The accuracy mode in measurement rule is set as default to get the
precise measurement for the searching-out channels.
The speed mode will speed the measurement but reduce the
measurement accuracy. It is set to default in search rule to search
out the available channels approximately.
The Top Cycle number is the searching times for each measurement.
It allows you to measure the specific searching-out channels
continuously.
69