Advertisement
ASSEMBLY
Center Rear Scraper
Installation
1. With the Rollers on level ground, place the 5/8-11
U-bolts over the frame tube and through the Center
Scraper Brackets, secure with Flanged Locknut. See
Figures 2-70 and 2-71.
NOTE
A scraper can be used as a guide to achieve the 1/4" gap.
U-Bolt,
5/8-11
Flanged
Locknut,5/8-11
2-76
TABLE OF CONTENTS
Center Scraper Bracket
Tube
Scraper
Figure 2-66: Center Rear Scraper Installation
2. Assemble the Scraper Tube to the Center Scraper
Brackets with a 3/8-16 U-Bolts, Scrapers and Flanged
Locknuts. Center the Scraper between the Notched
Wheels and adjust the Scraper so that there is a 1/4
gap between the Scraper and Notched Wheel.
Tighten.
3. Attach the Scrapers to the Scraper Tube with 3/8-16
U-Bolts and Flanged Locknuts, ensure that the
scrapers are centered between the Notched Wheels
along with a 1/4" gap between the Scraper and
Notched Wheel.
3630-30NC CtrRearScraper
U-Bolt,3/8-16
Flanged Locknut,3/8-16
F-982-0223
Advertisement
