Advertisement
Drawbar Turnbuckle
Adjustment
The Pulvi-Mulcher drawbar is designed to float in Field
Position and lock into a set position in transport.
Depending on tractor hitch height, the Turnbuckle may
need to be adjusted to level machine front to rear in
transport. Use the open end wrenches located on the
Hitch Leveler. See Figure 3-8. Machine may need to be
lowered to make adjustment. Remove all transport locks
before lowering and ensure shanks are raised. See
Figures 3-6 and 3-7.
Be sure to tighten Jam Nut after any adjustment is made.
Open End/Box End
Wrenches
for Harrow
F-982-0223
TABLE OF CONTENTS
Drawbar Leveler
Cylinder,4 x 16
Open End
Wrenches
for Turnbuckle
Drawbar Leveler
Cylinder Transport
Lock Stored
Figure 3-7: Drawbar Turnbuckle Adjustment
Turnbuckle
Jam Nut
Hitch Leveler
Turnbuckle
Turnbuckle
Jam Nut
OPERATION
Drawbar
3-9
Advertisement
