Advertisement
OPERATION
Scraper Adjustment
The Pulvi-Mulcher, if equipped with notched rear wheels
will have scrapers. To adjust scrapers; lower machine on
level surface. Push wheels against welded stop, add
spacer if needed. See Figures 4-5 and 4-6. Adjust
scrapers to 1/4" gap between scraper and wheel. See
Figure 3-10.
NOTE
Scrapers are optional on notched front rollers. Adjustment
procedure is the same for the front.
Transport Lock
Handle
Scraper
1/4"
3-12
TABLE OF CONTENTS
Scraper
1/4"
Rear
Notched Wheel
Figure 3-10: Scraper Adjustment
Front
Notched Wheel
3630-25&30NC OpScraperSetting
2-Bar Coil
Tine Harrow
Drawbar
F-982-0223
Advertisement
