Advertisement
ASSEMBLY
Rear Hitch Installation -
Optional
Kit Part Number 214025
1. Position the Rear Hitch to the rear frame hitch plates,
insert twelve 3/4-10 x 3 Bolts secure with Locknuts.
See Figure 2-87.
2. Slide the two Bulkhead Adapters into the bulkhead
plate and tighten. Attach the two female Couplers to
the Bulkhead Adapters.
3. Attach the two 3/8 Hoses and tighten. (See
"Hydraulic Fitting Torque Specifications" on
page 4-2.) Route the Hose Assembly along the inner
frame tube with the other Hydraulic Hoses to the front
of the drawbar.
Locknut,3/4-10
Bolt,
1/4-20 x 1
BulkHead,
Adapters
8MJ x 8MOR
Female Couple,
8 O-Ring
2-94
TABLE OF CONTENTS
Bolt,3/4-10 x 3
Rear Hitch
Figure 2-83: Rear Hitch Installation - Optional
4. Secure with tie wraps.
5. Insert the Tandem Harness Adapter into the bulkhead
plate and secure with two 1/4-20 x 1 Bolts and
Locknuts.
6. Hook up Tandem Haul Adapter to tractor side of
Enhanced Lighting Module.
NOTE
All wires/hoses must be firmly attached to machine frame
members so they do not sag or become torn loose by field
debris.
Tie Wrap
Harness
Tandem
Adapter
Locknut,
1/4-20
3630-25 OpRearHitch
Locknut,3/4-10
Male Coupler,
8 O-Ring
213852
Hose Asm,
3/8 x 460
Bolt,3/4-10 x 3
F-982-0223
Advertisement
