Advertisement
Wing Tooth Tube Installation
Verify Tooth Tube Bearings are positioned in the proper
hole.
Bottom Hole: Roller with 24" Diameter Wheels. See
Figure 2-55.
1. After marking the tubes for the shank locations, slide
the 80" Tooth Tubes into the Tooth Tube Bearings
accordingly. See Figures 2-57 and 2-58.
2. Position Tooth Tubes in the proper lateral position to
the wing frame before continuing. See Figures 2-59
and 2-60.
3. Place Stops on Tooth Control Tube against Tooth
Tube Bearing to prevent Tooth Control Tube from
sliding right or left. Secure with 1/2-13 x 4-1/2 Bolts
and Locknuts. See Figures 2-56, 2-57 and 2-58.
F-982-0223
TABLE OF CONTENTS
Bottom Position
Figure 2-51: Wing Tooth Tube Bearing Position for
Tooth Tube
Figure 2-52: Wing Tooth Control Tube Stop
Tooth Tube
Tooth Tube
Bearing
ToothTubeBrgNotched24
Wing Frame
Roller with 24" Wheels
Bolt,1/2-13 x 4-1/2
Locknut,1/2-13
Tooth Tube
Bearing
ASSEMBLY
Stop
2-59
Advertisement
