Advertisement
Land Leveler Installation -
Optional
Kit Part Number 214022
1. Attach the Leveler Mounts to the Center Frame Front
Roller Frame Tube using 3/4-10 x 6-13/16 x 7-3/4
U-Bolts and to the Front Wing Frame Tube using
3/4-10 x 5-25/32 x 7-1/4 U-Bolts. Secure with Flat
Washers and Locknuts. See Figures 2-83, 2-84 and
2-85.
Leveler
RH Wing
Leveler RH Center
3630-30NC LandLevelerOption
F-982-0223
TABLE OF CONTENTS
Flat Washer,3/4
Locknut,3/4-10
Leveler Mount
Locknut,1/2-13
Flat
Washer,1/2
Leveler LH Center
Figure 2-79: Land Leveler Installation - Optional
2. Slide the Center and Wing Levelers up into the mount
slot and insert 1/2-13 x 3 Bolt. On the opposite side
place the 1 x 1-1/2 Bushing over the bolt and into the
opening. Secure with Flat Washer and Locknut.
3. Insert 3/8 x 2-1/2 Cotter Pin into the upper hole and
spread.
3/4-10 x 6-13/16 x 7-3/4
Bushing,
1 x 1-1/2
Bolt,
1/2-13 x 3
Pin,Cotter
3/8 x 2-1/2
Leveler LH Wing
ASSEMBLY
U-Bolt,
(Center)
U-Bolt,
3/4-10 x 5-25/32 x 7-1/4
(Wing)
2-89
Advertisement
