Advertisement
Wing Fold Hydraulic Cylinder
Installation
Ports on front cylinders are rear facing. Ports on rear
cylinders are front facing.
Attach the four 4 x 30 Hydraulic Cylinders to the Front and
Rear Frame Lugs with the vendor supplied hardware. See
Figure 2-15.
Block Cylinder Rod Ends up from the frame to allow for
rod movement when purging the Fold Circuit.
Hydraulic Cylinder,
4 x 30
RH Front
Frame Lug
F-982-0223
TABLE OF CONTENTS
Figure 2-14: Wing Fold Hydraulic Cylinder Installation
NOTE
To reduce the Wing down float (droop) when turning
around with the machine raised, install Optional Wing
Fold 4 x 29-3/4 Hydraulic Cylinders with Internal Stop
instead of the standard Wing Fold 4 x 30 Hydraulic
Cylinders. See Figure 2-88.
Hydraulic Cylinder,
4 x 30
RH Rear
Frame Lug
Hydraulic Cylinder,
4 x 30
LH Front
Frame Lug
ASSEMBLY
Hydraulic Cylinder,
4 x 30
LH Rear
Frame Lug
3630-30NC OpFoldCyl
2-17
Advertisement
