Advertisement
ASSEMBLY
Roller Clamp Spacer
Installation
1. Raise the Machine and install Transport Locks. Wings
should be unfolded.
2. Check Roller Wheel Assemblies to ensure that the
wheels are tight together. If not, starting at the welded
stop end, slide the wheels tight together and adjust
the axle clamps so that it's against the wheel.
Bolt,
3/8-16 x 1-3/4
Locknut,3/8-16
2-74
TABLE OF CONTENTS
Bolt,3/8-16 x 1-3/4
Wheel Stop
Axle Spacer
Axle Spacer
Figure 2-65: Roller Clamp Spacer Installation
3. If there is a gap between the Axle Clamp and the
Wheel Stop, install the appropriate Clamp Spacer
with 3/8-16 x 1-3/4 Bolt and Locknut. See
Figure 2-69.
See Maintenance Section for a list of other Kits that are
available. See Figures 4-5 and 4-6.
Axle Spacer
Axle Clamp
Locknut,3/8-16
Axle Spacer
201442-201443 ClampEndSpacerKit
F-982-0223
Advertisement
