Advertisement
Center Frame Tooth Tube
Installation
Verify Tooth Tube Bearings are positioned in the proper
hole.
Bottom Hole: Roller with 24" Diameter Wheels. See
Figure 2-30.
1. After marking the tubes for the shank locations, slide
the 170" Tooth Tubes into the Tooth Tube Bearings.
See Figure 2-31.
2. Position Tooth Tubes in the proper lateral position to
the frame before continuing. See Figure 2-32.
Tooth Tube
ToothTubeBrgNotched24
Bottom Position
Figure 2-28: Tooth Tube Bearing Position for Roller
with 24" Wheels
F-982-0223
TABLE OF CONTENTS
Tooth Tube
Bearing
Frame
ASSEMBLY
2-33
Advertisement
