Advertisement
Introduction
The implement described in this manual has been
designed with care and built by skilled workers using
quality materials and processes. Proper assembly and
maintenance will provide you with satisfactory use for
seasons to come.
DANGER
DANGER
Read this entire manual before attempting to
assemble, adjust or operate this implement.
Failure to comply with this warning can result in
personal injury or death, damage to the implement
or its components and inferior operation.
Description of Unit
The 3631-30 Pulvi-Mulcher features three rows of 2-piece
Field Cultivator S-Tine Shanks for additional frame
clearance and residue flow. 8" Roller Axles with 61mm
bearings include 24" Roller Wheels. A 2-Bar Coil Tine
Harrow located in front of the rear roller provides
additional seedbed leveling. Active Hydraulic Wing Down
Pressure ensures the wings follow the soil contour and
distributes the weight uniformly across the width of the
machine.
Using this Manual
This manual will familiarize you with safety, assembly,
operation, adjustment, and maintenance. Read this
manual and follow the recommendations to help ensure
safe and efficient operation.
•
The information in this manual is current at time of
printing. Some parts may have changed to assure top
performance.
•
Location reference: Right and Left designations in this
manual are determined by facing the direction the
implement will travel during field operation, unless
otherwise stated.
F-982-0223
TABLE OF CONTENTS
Owner Assistance
If customer service or repairs are needed, contact your
Brillion dealer. They have trained personnel, parts and
service equipment specially designed for Brillion
products. Your implement's parts should only be replaced
with Brillion parts. If items covered in this manual are not
understood, contact your local Brillion Dealer.
Warranty Registration
Brillion Farm Equipment, by Landoll, shall have no
warranty obligation unless each product is registered
within 10 days of retail purchase, using the Landoll
Corporation Ag Products on-line registration process.
Please refer to the Ag Products Policy and Procedures
Manual, accessible at
instructions regarding product registration.
Enter your product information below for quick reference.
Refer to the ID plate as shown. See Figure 1-1.
MODEL NUMBER
SERIAL NUMBER
DATE OF PURCHASE
MODEL #
SERIAL #
MADE IN USA
Chapter 1
Safety Information
www.landoll.com
Landoll Company, LLC
Marysville, Kansas
www.landoll.com
Figure 1-1: ID Plate
for step by step
1-573-010006
1-1
Advertisement
