Advertisement
Land Leveler/V-Leveler -
Optional
The purpose of the Pulvi-Mulcher Land Leveler and
V-Leveler is to help fill in tractor wheel tracks in soft soil. If
soil pushes ahead of the bar, it is set too low. Striking
large rocks will damage the leveler bar and possibly other
parts on the machine. Adjust the Leveler to the highest
position that does the required job. A good starting point
is 3 to 4 inches above the ground.
Pin,1 x 7
4"
3" Setting
Ground
Level
Leveler Link
V-Leveler Bar
F-982-0223
TABLE OF CONTENTS
Clevis Pin,
1 x 3
Center Leveler
Mount
3630 25&30NC OpV LevelerSetting
Figure 3-9: V-Leveler Adjustment
V-Leveler Height Adjustment
To raise or lower the Wing Leveler Bars, remove the
1/2-13 x 3 bolts. To raise or lower the Center Section,
remove the 1 x 8 Pin and two 1 x 12-3/4 Pins on the
Drawbar. See Figure 3-9.
Land Leveler Height Adjustment
To raise or lower the Center and Wing Leveler Bars,
remove the 1/2-13 x 3 bolts.
Wing Leveler
Mount
Bolt,1/2-13 x 3
Wing Leveler
OPERATION
Bar
10"
3" Range
Ground
Level
3-11
Advertisement
