Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Landoll Manuals
  4. Farm Equipment
  5. Brillion 2512 Zone Commander
  6. Operator's manual

Landoll Brillion 2512 Zone Commander Operator's Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
2512 Zone Commander and Caddy
FOR UNITS SHIPPED AFTER DECEMBER 1, 2020
(SN: 25M201237 AND ABOVE)
PREVIOUS UNITS SHOULD REFERENCE F-1040-0320
Operators Manual
LANDOLL COMPANY, LLC
1900 North Street
Marysville, Kansas 66508
(785) 562-5381
800-428-5655 ~ WWW.LANDOLL.COM
F-1049-0421

Advertisement

loading

Related Manuals for Landoll Brillion 2512 Zone Commander

Summary of Contents for Landoll Brillion 2512 Zone Commander

  • Page 1 2512 Zone Commander and Caddy FOR UNITS SHIPPED AFTER DECEMBER 1, 2020 (SN: 25M201237 AND ABOVE) PREVIOUS UNITS SHOULD REFERENCE F-1040-0320 Operators Manual LANDOLL COMPANY, LLC 1900 North Street Marysville, Kansas 66508 (785) 562-5381 800-428-5655 ~ WWW.LANDOLL.COM F-1049-0421...
  • Page 2 Manuals for the 2512 Zone Commander F-1048 2512 Zone Commander Parts Manual F-1049 2512 Zone Commander Operators Manual F-1076 Caddy Parts Manual (ONLY) F-1049-0421...
  • Page 3 Table of Contents Introduction and Safety Information Understanding Safety Statements ..........1-2 Decal Safety .
  • Page 4 TABLE OF CONTENTS F-1049-0421...
  • Page 5 Introduction and Safety Information The Landoll Model 2512 Rigid & Folding Zone Commander are quality products designed to give years of trouble free performance. By following each section of this manual, your system will perform as designed for you and your operation.
  • Page 6 TABLE OF CONTENTS INTRODUCTION AND SAFETY INFORMATION Understanding Safety Decal Safety Statements 1. Examine safety decals and be sure you have the correct safety decals for the implement. You will find various types of safety information on the 2. Keep these signs clean so they can be observed following pages and on the machine signs (decals) readily.
  • Page 7 TABLE OF CONTENTS INTRODUCTION AND SAFETY INFORMATION Maintenance Safety DANGER 1. Understand the procedure before doing the work. • Do not allow anyone to ride on the tractor or Use proper tools and equipment. implement. Riders could be struck by foreign 2.
  • Page 8 TABLE OF CONTENTS INTRODUCTION AND SAFETY INFORMATION Tire Safety Safety Chain 1. Tire changing can be dangerous and should be 1. Use a chain with a strength rating equal to or greater performed by trained personnel using correct tools than the gross weight of towed machinery, which is and equipment.
  • Page 9 Chapter 2 TABLE OF CONTENTS Standard Specifications Model Specifications 2511N Rigid Zone Commander Number of Transport Estimated Model Frame Type Frame Configuration Shanks Width Weight 3,357 2511N-3-30 RIGID 107 (IN) RIGID 110" (9' - 2") W/2 GAUGE WHEEL 3,849 2511N-4-30 RIGID 107 (IN) RIGID 110"...
  • Page 10 TABLE OF CONTENTS STANDARD SPECIFICATIONS Tire Inflation Model Tire Size Ply/Load Rating Inflation Pressure (Psi) (Max.) Caddy STD IF 320/70R15 70 psi Caddy HD VF 385/65R22.5 70 psi Gauge Wheels IF280/70R15 64 psi Gauge Wheels 20.5 X 8.0 X 10 70 psi Recommended Torque Specification For Lug Bolts and Nuts Bolt Size...
  • Page 11 TABLE OF CONTENTS STANDARD SPECIFICATIONS General Torque Specifications (rev. 4/97) TORQUE SPECIFIED IN FOOT POUNDS - This chart provides tightening torques for general purpose applications when special torques are not specified on process or drawing. Assembly torques apply to plated nuts and capscrews assembled without supplemental lubrication (as received condition).
  • Page 12 TABLE OF CONTENTS STANDARD SPECIFICATIONS Hydraulic Fitting Torque Specifications TORQUE IS SPECIFIED IN FOOT POUNDS- 37 JIC, ORS, & ORB (REV. 10/97) This chart provides tightening torques for general purpose applications when special torques are not specified on process or drawing.
  • Page 13 TABLE OF CONTENTS STANDARD SPECIFICATIONS Shank Mounting Dimensions - Rigid Figure 2-3: 4-Shank Spacing F-1049-0421...
  • Page 14 TABLE OF CONTENTS STANDARD SPECIFICATIONS Figure 2-4: 5-Shank Spacing F-1049-0421...
  • Page 15 TABLE OF CONTENTS STANDARD SPECIFICATIONS Figure 2-5: 6-Shank Spacing F-1049-0421...
  • Page 16 TABLE OF CONTENTS STANDARD SPECIFICATIONS Figure 2-6: 7-Shank Spacing F-1049-0421...
  • Page 17 TABLE OF CONTENTS STANDARD SPECIFICATIONS Figure 2-7: 8-Shank Spacing F-1049-0421...
  • Page 18 TABLE OF CONTENTS STANDARD SPECIFICATIONS Shank Mounting Dimensions - Folding Figure 2-8: Folding - 7 Shank Spacing 2-10 F-1049-0421...
  • Page 19 TABLE OF CONTENTS STANDARD SPECIFICATIONS Figure 2-9: Folding - 8 Shank Spacing F-1049-0421 2-11...
  • Page 20 TABLE OF CONTENTS STANDARD SPECIFICATIONS Figure 2-10: Folding - 9 Shank Spacing 2-12 F-1049-0421...
  • Page 21 TABLE OF CONTENTS STANDARD SPECIFICATIONS Figure 2-11: Folding - 10 Shank Spacing F-1049-0421 2-13...
  • Page 22 TABLE OF CONTENTS STANDARD SPECIFICATIONS Figure 2-12: Folding - 11 Shank Spacing 2-14 F-1049-0421...
  • Page 23 TABLE OF CONTENTS STANDARD SPECIFICATIONS Figure 2-13: Folding - 12 Shank Spacing F-1049-0421 2-15...
  • Page 24 TABLE OF CONTENTS STANDARD SPECIFICATIONS Figure 2-14: Folding - 13 Shank Spacing 2-16 F-1049-0421...
  • Page 25 TABLE OF CONTENTS STANDARD SPECIFICATIONS Figure 2-15: Folding - 14 Shank Spacing F-1049-0421 2-17...
  • Page 26 TABLE OF CONTENTS STANDARD SPECIFICATIONS Figure 2-16: Folding - 15 Shank Spacing 2-18 F-1049-0421...
  • Page 27 TABLE OF CONTENTS STANDARD SPECIFICATIONS Figure 2-17: Folding - 16 Shank Spacing F-1049-0421 2-19...
  • Page 28 TABLE OF CONTENTS STANDARD SPECIFICATIONS NOTES: 2-20 F-1049-0421...
  • Page 29 Contact your return bolts, clips, etc. to their original locations. Landoll dealer for further instructions. A tripped To ensure assemblies are aligned, insert all bolts and shank can release suddenly and cause serious leave the nuts loose until completion of final injury or death.
  • Page 30 TABLE OF CONTENTS ASSEMBLY INSTRUCTIONS Assembly Preparation Rear Jack Stands (Rigid and Folding) 1. With the Jack Stand Mount Bracket positioned on the 1. Hook up the Zone Commander to a tractor using the bottom side of the rear Frame, attach the Jack Stand three-point hitch.
  • Page 31 TABLE OF CONTENTS ASSEMBLY INSTRUCTIONS SMV Bracket Installation 1. Attach the SMV mounting bracket at a point where emblem is visible from rear of machine, using u-bolt and 5/8-11 flange head serrated nuts (See Figure 3-3.) 2. Attach SMV emblem to top of SMV mounting bracket using 1/4-20 x 1 hex head cap screws, flat washers, and hex lock nuts (See Figure...
  • Page 32 TABLE OF CONTENTS ASSEMBLY INSTRUCTIONS Table provided for general use. NOTES: F-1049-0421...
  • Page 33 The RSB Clamp has three holes: the top hole has a maximum operating depth up to 14", the lower two holes have operating depths ranging from 16" to 20". Landoll recommends using the top upper holes for optimal machine efficiency. ...
  • Page 34 TABLE OF CONTENTS ASSEMBLY INSTRUCTIONS DANGER OPERATING AT A DEPTH THAT EXCEEDS THE MAXIMUM SHANK TRIP HEIGHT EXPOSES THIS MACHINE TO DAMAGE THAT MAY LEAD TO PERSONAL INJURY OR DEATH. CLAMP WELDMENT SETBACK OPTION The Auto Reset Spring Clamp IS NOT to be operated at depths greater than 14"...
  • Page 35 TABLE OF CONTENTS ASSEMBLY INSTRUCTIONS SETBACK OPTION CLAMP WELDMENT CONNEX WEARSTRIP BUSHING BRACKET WEARSTRIP COVERBOARD KIT SHANK LEG (OPTIONAL) SHOWN: 1-1/4 PARABOLIC SPRING SLOTTED PINS MULTIPLE POINTS AVAILABLE SEE PARTS MANUAL FOR DETAILS Figure 3-5: Auto-Reset Shank Clamp (Hydraulic) F-1049-0421...
  • Page 36 TABLE OF CONTENTS ASSEMBLY INSTRUCTIONS CLAMP WELDMENT WEARSTRIP BRACKET CONNEX BUSHING WEARSTRIP SHANK LEG SHOWN: 1-1/4 STRAIGHT MULTIPLE POINTS AVAILABLE SEE PARTS MANUAL FOR DETAILS SPRING SLOTTED PINS Figure 3-6: RSB Shank Clamp F-1049-0421...
  • Page 37 TABLE OF CONTENTS ASSEMBLY INSTRUCTIONS Coverboard Installation Right Hand & Left Hand Coulter Assemblies 1. Insert four 1/2-13 x 2-1/2 bolts into the coverboard bracket before attaching the coverboard furrower. 1. Assemble coulter adjustment tube to coulter (See Figure 3-5.) Secure with 1/2-13 locknuts and assembly using roll pins 1/2 x 4 and 5/16 x 4.
  • Page 38 TABLE OF CONTENTS ASSEMBLY INSTRUCTIONS RIPPLED BLADE PYRAMID BLADE LH ASSEMBLY EXPANDED VIEW SMOOTH BLADE RH ASSEMBLY Figure 3-8: Coulter Assembly 3-10 F-1049-0421...
  • Page 39 TABLE OF CONTENTS ASSEMBLY INSTRUCTIONS GAUGE WHEEL ASSEMBLY - HORIZONTAL MOUNT Used On All Units With Odd Number Of Shanks Up To And Including 9 And All Units Larger. LH GAUGE WHEEL - EXPANDED VIEW TOP LINK LOCKNUT, 3/4-10 RH GAUGE PLATE-CONTROL ROLL PIN SHOULDER PIN...
  • Page 40 TABLE OF CONTENTS ASSEMBLY INSTRUCTIONS GAUGE WHEEL ASSEMBLY - VERTICAL MOUNT Used On All Units With Even Number Of Shanks 4 Through 8. DEPTH GAUGE LOCKNUT, 3/4-10 LOCKNUT, 3/4-10 LH, GAUGE GROOVED PLATE-CONTROL TOP LOCK LOCKNUT, 1-8 ROLL PIN TIRE/WHEEL ASSEMBLY SHOULDER SHOULDER WASHER,...
  • Page 41 TABLE OF CONTENTS ASSEMBLY INSTRUCTIONS Electrical Installation General Hydraulic Components - Hydraulic Reset Option 1. Attach left and right (Amber) Light Mount Brackets to frame. (See Figures 3-11 thru 3-12.) Figure 3-13 is provided as a general guideline for the 4 Shank: using 3-4-10 x 2 bolts and 3/4-10 lock components provided with the Hydraulic Reset Option.
  • Page 42 TABLE OF CONTENTS ASSEMBLY INSTRUCTIONS AG FLASHER CONTROL FLAT MODULE WASHER, 1/4W REAR WARNING LIGHTS HARNESS 7PIN/4PIN LOCKNUT, HARNESS 1/4-20 BOLT, 1/4-20 X 2 LIGHT MOUNT REFLECTOR BRACKET FLAT WASHER 1/4W LOCKNUT, BOLT, 1/4-20 1/4-20 X 3/4 BRACKET LOCKNUT, 1/4-20 HOLDER LOCKNUT, 1/2-13 BOLT, 1/4-20...
  • Page 43 TABLE OF CONTENTS ASSEMBLY INSTRUCTIONS Figure 3-12: LED Light and SMV Harness Wire Designations F-1049-0421 3-15...
  • Page 44 TABLE OF CONTENTS ASSEMBLY INSTRUCTIONS ACCUMULATOR HOSE WRAP PRESSURE REDUCTION VALVE BALL VALVE CLAMP PLATE COVER HOSE CLAMP HOSE CLAMP BRACKET RH HOSE CLAMP MOUNT BRACKET LH HOSE CLAMP MOUNT BRACKET HOSE MOUNT PLATE EXTENSIONS Used On Folding Units Only. Figure 3-13: Hydraulic Reset Option - General Components 3-16 F-1049-0421...
  • Page 45 TABLE OF CONTENTS ASSEMBLY INSTRUCTIONS Closer Platform (Option) and Features SPRING ROD GLIDE WASHER SPACER SPACER The Closer Platform allows the user to mount 5 different LOCKNUTS features: Closer Wheel, Flat Bar Basket 20", Closer Disc, REAR SPRING KEEPER Crumbler Wheel or Packer Reel. Figure 3-15: Closer Platform Spring Setup REAR Figure 3-14: Closer Platform Assembled...
  • Page 46 TABLE OF CONTENTS ASSEMBLY INSTRUCTIONS Table provided for general use. NOTES: 3-18 F-1049-0421...
  • Page 47  DANGER Do not attempt to manually reset a shank assembly or straighten a bent shank mount. Contact a Landoll dealer or Landoll Company, LLC immediately for assistance.  DANGER Never allow anyone to ride on the Zone Commander at any time.
  • Page 48 NOTE If the system continuously loses pressure, contact Hydraulic Accumulator Landoll Company, LLC and request to speak with a Operation technician.  The 2512 Rigid and Folding Zone Commander may be DANGER equipped with the Hydraulic Reset Option.
  • Page 49 TABLE OF CONTENTS OPERATION AND MAINTENANCE Attaching to Three-Point Hitch Attaching to Caddy 1. Carefully back the tractor into place. If you will be attaching the Zone Commander to a Caddy: 2. Attach the Zone Commander to the tractor. 1. Carefully back the Caddy up to the Zone Commander.
  • Page 50 TABLE OF CONTENTS OPERATION AND MAINTENANCE CAT III NARROW HITCH CAT II HITCH USED WITH 7, 8, & 9 FOLDING FRAMES USED WITH 3, 4, & 5 NARROW FRAMES & 4, 5, 6, & 7 STANDARD FRAMES CAT III HITCH CAT III HITCH USED WITH 7, 8, &...
  • Page 51 TABLE OF CONTENTS OPERATION AND MAINTENANCE Hydraulic Fold System  WARNING 1. The Zone Commander is equipped with a hydraulic The wing fold hydraulic system MUST be fold system to raise and lower the wing frames for operated in float once the wings are unfolded OR narrow transport.
  • Page 52 TABLE OF CONTENTS OPERATION AND MAINTENANCE Field Operation - Three Point 8. Tighten the slotted nut while rotating the hub until there is a slight resistance to wheel rotation. Back the Hitch Type slotted nut off one notch until the wheel rotates freely without end play.
  • Page 53 Chapter 5 TABLE OF CONTENTS Troubleshooting Guide The Troubleshooting Guide, shown below, is included to help you quickly locate problems that can happen using your 2512 Series Rigid & Folding Zone Commander. Follow all safety precautions stated in the previous sections when making any adjustments to your machine.
  • Page 54 TABLE OF CONTENTS TROUBLESHOOTING GUIDE NOTES: F-1049-0421...
  • Page 55 Document Control Revision Log: Date Form # Improvement(s): Description and Comments 05/2020 F-1049 Initial Release 12/2020 F-1049-1220 Added: Folding Shank Mounting Dimensions ECN 46468 - Added Depth Gauge and Decal, Added Hose Mount Plate Extension ECN 46650 - Updated Warning Light Bracket, Gusset-Frame Braces Added: Closer Platform and Features 01/2021 F-1049-0121...
  • Page 56 Equipment from Landoll Company, LLC is built to exacting standards ensured by ISO 9001 registration at all Landoll manufacturing facilities. 2512 Zone Commander Operators Manual Re-Order Part Number F-1049 LANDOLL COMPANY, LLC 1900 North Street Marysville, Kansas 66508 (785) 562-5381 800-428-5655 ~ WWW.LANDOLL.COM...

This manual is also suitable for:

Brillion 2511n rigid zone commanderBrillion 2512 rigid and folding zone commanderBrillion 2512 folding zone commander2511n-3-302511n-4-302511n-5-30 ... Show all