Advertisement
Wing Fold Hydraulic Cylinder
With Internal Stop - Optional
Order four 229388 Hydraulic Cylinders with Internal Stop
to reduce the Wing down float (droop) when turning
around with the machine raised.
Ports on front cylinders are rear facing. Ports on rear
cylinders are front facing.
Hydraulic Cylinder
4 x 29-3/4
RH Front
Frame Lug
Figure 2-84: Wing Fold Hydraulic Cylinder With Internal Stop - Optional
F-982-0223
TABLE OF CONTENTS
Attach the optional 4 x 29-3/4 Hydraulic Cylinders with
Internal Stop to the Front and Rear Frame Lugs with the
vendor supplied hardware.
Block Cylinder Rod Ends up from the frame to allow for
rod movement when purging the Fold Circuit.
Refer to "Purging the Hydraulic System" on
page 2-31.
Hydraulic Cylinder
4 x 29-3/4
RH Rear
Frame Lug
Hydraulic Cylinder
4 x 29-3/4
LH Rear
Frame Lug
Hydraulic Cylinder
4 x 29-3/4
LH Front
Frame Lug
ASSEMBLY
2-95
Advertisement
