Configuration Of Drive-Related I/Os (Without Symbolic Assignment); Overview - Siemens SIMOTION D4 5-2 Series Commissioning And Hardware Installation Manual

Configuration of drive-related I/Os (without symbolic
assignment)
A.1

Overview

The configuration of local measuring inputs is fundamentally different to the configuration of
global measuring inputs.
The assignment of the local measuring inputs is permanently related to the hardware of the
control unit and is performed
● On the drive side via the drive expert list and
● During the configuration of the TO measuringInput via the measuring input number.
Local and global measuring inputs have different properties. Detailed information on the
differences can be found in the appendix,
- in Section Local and global measuring inputs (Page 374).
Information about the configuration can be found
● For global measuring inputs (with symbolic assignment) in Section Configuration of global
● For local measuring inputs in the appendix, in Section Configuration of local measuring
Additional references
Further information and programming examples for configuring drive-related I/Os without
symbolic assignment can be found
● At the following Internet address
● In SIMOTION Utilities & Applications
SIMOTION D4x5-2
Commissioning and Hardware Installation Manual, 02/2012
measuring inputs (Page 262).
inputs (Page 376)
(http://support.automation.siemens.com/WW/view/en/29063656)
SIMOTION Utilities & Applications is part of the scope of delivery of SIMOTION SCOUT.
A
373