Siemens SIMOTION D4 5-2 Series Commissioning And Hardware Installation Manual page 22

Description
1.2 System components
Component
SMx sensor modules
Motors with DRIVE-CLiQ
interface
DMC20/DME20 DRIVE-CLiQ hub ... enables the number of DRIVE-CLiQ interfaces to be increased
Note
You can find detailed information about components in the SINAMICS S110/S120 family of
products in the SINAMICS S110/S120 manuals.
It is possible that older DRIVE-CLiQ components can no longer be used with SIMOTION
D4x5-2/CX32-2. You can find detailed information on this in SIMOTION D4x5-2
Commissioning and Hardware Installation Manual at "Migration of D4x5 to D4x5-2" in
Section "Permissible combinations".
Optional components
The functionality of the D4x5-2 control unit can be expanded with the following components:
Table 1- 7
Component
CBE30-2 Ethernet
communication board
TB30 terminal board
The components are plugged into the option slot of the control unit.
22
Function
... enable acquisition of encoder data from connected motors via
DRIVE-CLiQ.
... allow simplified commissioning and diagnostics, as the motor
and encoder type are identified automatically.
and the creation of a point-to-point topology.
Optional components
Function
Communication via PROFINET IO with
IRT and PROFINET IO with RT
Terminal expansion, i.e. additional
analog and digital I/Os
D4x5-2 DP
No
Yes
Commissioning and Hardware Installation Manual, 02/2012
D4x5-2 DP/PN
Yes
Yes
SIMOTION D4x5-2