Siemens SIMOTION D4 5-2 Series Commissioning And Hardware Installation Manual page 191

Result
The DRIVE-CLiQ components loaded to the user project by means of automatic
configuration are displayed in the project navigator.
Figure 6-25
You must then
● If required, reconfigure SINAMICS components (e.g. components without a DRIVE-CLiQ
● Assign the "TO axis" to "Drive"
SIMOTION D4x5-2
Commissioning and Hardware Installation Manual, 02/2012
Project navigator with real configuration
interface, such as an encoder connected via SMCxx).
6.3 Performing an online configuration for the D4x5-2
Commissioning (software)
191