Siemens SIMOTION D4 5-2 Series Commissioning And Hardware Installation Manual page 228

Commissioning (software)
6.6 Testing a drive with the drive control panel
Figure 6-37
7. Click the "Drive On" button. The "Enable is set" LED lights up in green color. If you move
8. Click "Drive Off" to stop the drive after you completed the test.
9. Deactivate the enable and click the "Give up control priority" button to deactivate control
from the PG/PC. In this state, you can no longer make the drive rotate.
228
Entering a setpoint
the slider to the right, the drive rotates. The current motor speed is displayed in "Actual".
Commissioning and Hardware Installation Manual, 02/2012
SIMOTION D4x5-2