Siemens SIMOTION D4 5-2 Series Commissioning And Hardware Installation Manual page 189

4. The drive object types can now be selected via a further dialog box.
5. Select whether a servo- or vector-type drive object is to be used.
6. Click "Create" to start the automatic configuration. As soon as automatic commissioning
SIMOTION D4x5-2
Commissioning and Hardware Installation Manual, 02/2012
Figure 6-23 Selecting the drive object type
has been run through, an upload operation (Load to PG) is performed automatically.
6.3 Performing an online configuration for the D4x5-2
Commissioning (software)
189