Analog Output 1 (Tb201); Figure 4-3. Analog Output Connector (Tb201); Table 4-3. Analog Output Connector Pin-Out (Tb201) - Aerotech SOLOIST Hardware Manual

Soloist Hardware Manual

4.2.2. Analog Output 1 (TB201)

Analog output 1 is driven by a 16-bit DAC8531 digital to analog converter and buffered
by a TL084 op-amp, producing a single-ended output voltage in the range of +/- 10 volts.
This produces a resolution of 305 uVolts per bit of the D/A. The output current is limited
to less than 50 mA. Note that the analog outputs are referenced to TB201-1. Analog
output 0 is present on J104, see Section 3.1.4. The analog outputs will be zero volts
during reset.
Table 4-3. Analog Output Connector Pin-out (TB201)
Pin # Label
1 AGND
4 AOUT 1
The analog output common may be found at J103 pin 23 or TB201 pin 1.
Figure 4-3.
www.aerotech.com
Description
Analog Common
Analog Output 1
Analog Output Connector (TB201)
Soloist Options
In/Out/Bi.
N.A.
Output
4-3