Aerotech SOLOIST Hardware Manual page 10

Regulatory Information
x

Voltages greater than 60 Volts may be present inside Soloist after a discharge
time of 5 seconds.

End user must provide protection concerning power interruption / restoration if
required.

End user must provide earth fault current protection if required.
" 
End user must provide protection against lightning and switching surges if
required.

Control and EStop requirements are determined and provided by the end user.
" 
Wire and cabling provided with the Soloist meets Aerotech's electrical and listed
environmental requirements. End user must meet final requirements.
Failure to follow the described procedures could result in serious injury and/or damage to
the equipment.
Soloist Hardware Manual
# # #
www.aerotech.com