Configuration; User Settings; Service Menu - Rice Lake BenchPro Series Operation Manual

3.0

Configuration

3.1

User Settings

When navigating the user settings menu, press
select.
Parameter









After selecting all parameter settings, move to the
3.2

Service Menu

The service menu provides all configuration settings and access to perform calibrations.
To navigate the service setting menu, press
Press to return to the previous parameter.
To enter into the service menu:
1. Remove the scale platform.
2. Remove the sealing screws.
Primary
operator
display
Load
bridge
3. Press to power on the scale.
to scroll through the parameters and options. Press
Options
30 sec, 1 min, 3 min, 5 min, No off
On, Auto, Off
nci, 8213, ECr, EH-SCP, SMA
1200,2400,4800,9600,19200,38400, 57600 Baud rate
7 even, 7 odd, 7 none, 8 none
1,2
On, Off
RAM, ROM, DIV-A, DIV-O
—
Table 3-1. User Settings
to scroll through the parameters and settings; press
Figure 3-1. Remove Sealing Screws
Definition
Auto Off Time Setting
Backlight Setting
Protocol (model dependent)
Parity
Stop bits
Tare
Diagnostics
Done (exit)

parameter and press
Die-cast base
enclosure
Sealing screws
main PCB cover
Battery cover
to
to confirm and save settings.
to select.
Configuration 9