Registering A Neteco App Account; Logging In To The Neteco App - Huawei FusionModule2000-S User Manual

FusionModule2000-S Smart Modular Data Center
User Manual
Figure 5-88 Replacing a certificate
----End

5.3.16.1.3 Registering a NetEco App Account

After the app is correctly installed on a mobile device, you can register an account
through the app.
Prerequisites
●
●
Procedure
Step 1 On the mobile device, tap the NetEco app icon.
Step 2 On the login screen, tap REGISTER.
Step 3 On the registration screen, set the user name, email address, password, and
verification code, and tap REGISTER.
Step 4 After an account is successfully registered, use the registered email address and
password to log in to the NetEco app.
----End

5.3.16.1.4 Logging In to the NetEco App

After the app is installed on a mobile device, you can log in to the NetEco server
using the app.
Issue 07 (2022-09-30)
The device has connected to a WiFi or mobile network.
The NetEco app has been installed. For details about how to install it, see
5.3.16.1.1 Installing the NetEco
Copyright © Huawei Technologies Co., Ltd.
5 Power-On Commissioning
App.
263