Huawei FusionModule2000-S User Manual page 231

FusionModule2000-S Smart Modular Data Center
User Manual
5.
6.
7.
Figure 5-56 Configuring the device alert deployment
Issue 07 (2022-09-30)
Table 5-34 Camera configuration parameters
Condition
Encoding Resolutio
Protocol n
H.265 1080P
H.264 1080P
H.265 720P
H.264 720P
H.265 720P
H.264 720P
Import the motion detection algorithm package. Search for the algorithm
package SDC-C16_9.0.0.SPC307_beh.zip on the technical support website,
download the package, and decompress it. Go back to the web system,
choose Maintenance > Software-defined Camera, and upload the algorithm
package in the Perimeter firmware area.
Choose Settings > Intelligent Analysis > Common Intelligence. Select
Enable, click Add, add motion detection areas, set motion detection
parameters, and click Save.
Configure the device alert deployment and alarm linkage policy. Choose
Service > Alarm Service > Alarm Input. Click Intelligent Alarms to access
the Motion page. On the page that is displayed, you can configure Device
Alert Deployment and Alarm Linkage Policy.
Copyright © Huawei Technologies Co., Ltd.
Frame I-Frame
Rate Interval
25 50
25 50
25 50
25 50
25 50
25 50
5 Power-On Commissioning
Result
Minimum Supporte
Bit Rate d Video
Required Storage
Duration
(h)
1 Mbit/s 66
1 Mbit/s 66
0.8 Mbit/s 75
1 Mbit/s 66
0.6 Mbit/s 105
0.8 Mbit/s 75
220