Table of Contents
Advertisement
FusionModule2000-S Smart Modular Data Center
User Manual
Function
Remotely
open a
cabinet
electroni
c clasp
lock
Open
cabinet
electroni
c clasp
locks in
batches
a: Cabinet electronic clasp lock 1 of IT cabinet 101 is used as an example.
Only IT cabinets support remote door opening and closing.
Step 6 When closing the door, rotate the lock handle vertically downwards. If the door
cannot be opened or closed properly, locate the fault.
1.
2.
Issue 07 (2022-09-30)
Path
Choose
Monitoring >
Cabinet > IT
Cabinet101a.
Choose Monitoring > Cabinet,
and click the Controls tab.
NO TICE
Check whether there is friction between the lock tongue and the electronic
clasp lock. If there is friction, adjust the installation position of the electronic
clasp lock.
Figure 5-46 Adjusting the installation position
Check whether there is interference between the lock tongue and the cabinet
post. If they interfere with each other, adjust the installation position of the
lock tongue.
Copyright © Huawei Technologies Co., Ltd.
Operation
Click the
Select Open front door or Open
Controls tab.
back door from the Cabinet
door control drop-down list box,
and click Submit to remotely
open the door.
Select Open front door, Open
back door, or Open all doors
from the Open the door drop-
down list box, select the setting,
and click Submit. The cabinet
electronic clasp locks unlock the
doors in batches based on the
signal value.
5 Power-On Commissioning
206
Advertisement
Table of Contents
