Table of Contents
Advertisement
FusionModule2000-S Smart Modular Data Center
User Manual
Figure 3-41 Clamping a vertical plate
Step 2 Rotate the vertical plate by 90 degrees to stand it on the top plate of the cabinet.
Figure 3-42 Rotating the vertical plate by 90 degrees
Step 3 Install the other vertical plate into the mounting holes in the second row counting
from the front door to the rear door in the same way. Install one M5x10 tapping
screw inside each of the two vertical plates to ensure equipotential bonding with
the cabinet.
Issue 07 (2022-09-30)
Copyright © Huawei Technologies Co., Ltd.
3 Hardware Installation
72
Advertisement
Table of Contents
