Table of Contents
Advertisement
FusionModule2000-S Smart Modular Data Center
User Manual
Figure 5-38 Adding alarm notification
Mailbox Address in Alarm Notification can be selected after it is added in
Mailbox Settings. Mobile Phone Number can be selected after it is added in
SMS Settings.
Step 6 Click Confirm to access the re-authentication page. Enter Login password and
click Submit.
----End
Follow-up Procedure
To modify or delete the email parameter settings, click Modify or Delete.
If the email address fails to be set, rectify the fault based on the handling
suggestions of the error codes listed in the following table. If an error code is not
listed in the following table, provide the ECC run log and contact the technical
support.
Table 5-19 Mailbox error codes
Type
Failed to
resolve the
domain
name.
Issue 07 (2022-09-30)
NO TICE
Error Code
2
3
Copyright © Huawei Technologies Co., Ltd.
Suggestion
1. Check whether the IP address of the DNS
server is correct.
2. Check whether the domain name of the
email server is correctly configured.
3. Check whether the network communication
between the monitoring module and the
DNS server is normal.
1. Try again later.
2. Check whether the domain name of the
email server is correctly configured.
5 Power-On Commissioning
191
Advertisement
Table of Contents
