Table of Contents
Advertisement
FusionModule2000-S Smart Modular Data Center
User Manual
Step 8 Connect the communications cables and antennas to the ECC800-Pro main control
module.
Step 9 Choose Maintenance > Configuration File and import the backup configuration
file, or set parameters for the devices that connect to the ECC800-Pro to ensure
normal communication.
----End
6.3.2.2 Replacing an ECC800-Pro PSU
Prerequisites
Do not touch the terminals in the rear of a removed power supply unit (PSU) to
avoid electric shocks.
●
●
Context
The PSU is hot-swappable.
Procedure
Step 1 Push the locking latch in the upper right corner of the PSU panel leftwards.
Step 2 Pull out the handle of the PSU to remove the PSU from the subrack.
Step 3 Gently push the reserved PSU into the subrack along guide rails, and push the
locking latch rightwards to secure the handle.
Figure 6-8 Replacing a PSU
----End
6.3.2.3 Replacing ECC800-Pro Antennas
Issue 07 (2022-09-30)
D ANGER
Tool: insulation gloves
Material: A spare undamaged and undeformed PSU of the same model is
available.
Copyright © Huawei Technologies Co., Ltd.
6 Operation and Maintenance
303
Advertisement
Table of Contents
