Huawei FusionModule2000-S User Manual page 250

FusionModule2000-S Smart Modular Data Center
User Manual
Table 5-40 Parameter description
Parameter
The NTP clock source server
NTP server IP
●
●
Step 8 Configure cameras to synchronize time with the IVS1800.
The camera NTP synchronization function for the server is disabled by default. The
camera NTP synchronization function needs to be enabled for the server that
connects to the camera. After the camera NTP synchronization function is enabled
on the server, cameras will automatically synchronize time with the server.
1.
2.
3.
4.
5.
Issue 07 (2022-09-30)
If an NTP server is configured onsite, synchronize the time with the NTP
server.
If no NTP server is configured onsite, manually configure the server time:
Change Timezone config and Time config based on the time of the source
server to be synchronized.
Log in to the OMU portal as user admin.
Choose Maintenance > Unified Configuration.
Set Module Name to SCU and click Search.
In the search results, click Edit in the row where Parameter Name is NTPIPC
and set Value to 1.
Click Save. After the camera NTP synchronization function is enabled, the
camera, after being connected to the server, will automatically time-
synchronize with the server.
Figure 5-74 Configuring camera NTP synchronization
Copyright © Huawei Technologies Co., Ltd.
5 Power-On Commissioning
Setting
Indicates whether the NTP clock
source server is specified for time
synchronization.
● Select Yes if an NTP server is
configured onsite.
● Select No If no NTP server is
configured onsite.
Indicates the IP address of the NTP
clock source server. After this
parameter is specified, the server
synchronizes the time to this clock
source.
239