Table of Contents
Advertisement
FusionModule2000-S Smart Modular Data Center
User Manual
Table 5-41 Installation modes
Installation
Mode
Server+Client
Client
Step 4 Select I accept this agreement (A) and click Next.
Step 5 Set parameters such as the server port and click Next.
Step 6 Select the installation directory and click Next.
Step 7 Select the path for saving the backup files and click Next.
Step 8 Click Install to start the installation.
Issue 07 (2022-09-30)
Scenario and Restriction
● An iClient S100 system requires at least one iClient S100
server.
● When only one client is required for service configuration and
operations, you only need to complete the installation in this
mode.
● In this mode, if you log in to the local iClient S100 server,
enter 127.0.0.1 as the server IP address. If you log in to other
iClient S100 servers, enter the IP address of the peer PC as
the server IP address.
● When configuring services and perform operations on
multiple clients, select the client mode on other computers in
addition to the server+client mode on the local computer.
● Currently, one iClient S100 server can connect to a maximum
of 16 clients (including the one installed on the computer in
server+client mode).
● In this mode, enter the IP address of the iClient S100 server
after logging in, that is, the IP address of the PC where the
existing server is installed.
NO TE
● The default values of Web Port and Adms Port are 8098 and 8088 respectively.
If the ports are occupied, manually change the port number. Use a port number that is
not in use and that is not the database port number 5442 or Redis port number 6390,
21, or 80.
● Select Add exception to the firewall to prevent the Windows firewall from blocking
the program.
NO TE
The default installation path is C:\Program Files\iClient S100. You can also click Browse to
specify the installation path. Ensure that the selected installation path has sufficient disk
space as prompted.
NO TE
By default, the system scans all disks, locates the disk with the largest available space, and
creates the SecurityDBBack folder. You can also click Browse to specify the path for storing
the backup files.
Copyright © Huawei Technologies Co., Ltd.
5 Power-On Commissioning
241
Advertisement
Table of Contents
