FusionModule2000-S Smart Modular Data Center
User Manual
Table 5-49 Setting the authentication password
Path
System
Settings >
NMS
Application
> NetEco >
Set
Authenticati
on Password
Step 4 Click Submit.
----End
5.3.14.3 Obtaining the NetEco Software License
Obtain the license from the technical support website.
●
●
5.3.14.4 Obtaining the Adapter Software Installation Packages
Obtaining the Adapter Software Installation Packages
This section describes how to obtain the adapter software installation package.
●
Issue 07 (2022-09-30)
Parameter
Authenticatio
n password
Confirm
authenticatio
n password
For enterprise users:
a.
Log in to the technical support website at https://support.huawei.com/
enterprise.
b.
Browse or search for iMaster NetEco License Application Guide, and
apply for the license of the NetEco software by referring to the guide.
For carriers:
a.
Log in to the technical support website at https://support.huawei.com.
b.
Browse or search for iMaster NetEco License Application Guide, and
apply for the license of the NetEco software by referring to the guide.
For enterprise users:
a.
Log in to the iMaster NetEco technical support website.
b.
Obtain the iMaster NetEco V600R022C00XXX ReleaseDoc_EN (Data
Center).zip, DP_V600R022C00XXX_DCAdapters.zip, and
DP_V600R022C00XXX_DomainAdapters packages, decompress the
packages, and search for the adapter software installation package in the
DP_V600R022C00SPCXXX_XXAdapters and
DP_V600R022C00XXX_DomainAdapters based on the NE types and
Copyright © Huawei Technologies Co., Ltd.
Default
Setting
Value
Modifyme
Set this parameter based on
_123
customer requirements.
NOTE
Requirements for setting passwords:
a–z, A–Z, 0–9, ~!@#^*_={}:,./?-`$ (8–32
characters that include at least three
of the following types: digits,
lowercase letters, uppercase letters,
and special characters)
-
-
5 Power-On Commissioning
251