Facial Recognition; Recording Facial Data - Huawei FusionModule2000-S User Manual

FusionModule2000-S Smart Modular Data Center
User Manual
Table 5-15 NetEco parameters
Parameter
Name
Address type
NetEco domain
name
Port number
Network port
for link setup
----End

5.3.4 Facial Recognition

5.3.4.1 Recording Facial Data

Prerequisites
The FusionModule app has been installed on the PAD.
Procedure
1.
2.
3.
Issue 07 (2022-09-30)
the mobile data is Enable and the gateway address type is Domain
name.
Settings
Domain name.
This parameter is set by default.
31220
WAN_1
Log in to the FusionModule app on the PAD as an administrator.
On the main screen of the app, tap
Face Account Management. After reading the message, tap OK.
Click Add to start recording facial data.
NO TE
The facial data is used only for configuring the facial recognition function and is not
used for other purposes. The facial data is encrypted during transmission in the
ECC800-Pro to ensure that the personal data of users is fully protected.
Copyright © Huawei Technologies Co., Ltd.
5 Power-On Commissioning
. On the displayed Edit screen, select
184