6 4 Install Carriage Bearings - GE AMX-4+ Technical Manual

GE MEDICAL SYSTEMS
REV 5
ILLUSTRATION 4-11
CARRIAGE BEARINGS
4 6 4 Install Carriage Bearings
RUBBER
BUMPER
BEARING
SHOULDER BOLT
1. Lubricate bearings if necessary.
2. Attach four forward facing bearings to carriage mounting flanges with hex head
shoulder bolts. See Illustration 4-11. Apply Loctite and torque to 40-60
pound-inches (4.5 to 6.7 N-m)
3. Install side facing bearings at mounting locations on each side of carriage with
shoulder bolts.
4. Install carriage assembly in vertical column assembly. Refer to Section 4-14.
4-20
(MODEL 2169360, 2236420 & 2275938 SERIES)
G3 CARRIAGE
ASSEMBLY
SPACER
BEARING
WASHER
AMX-4+ SERVICE
DIRECTION 2173225-100
SHOULDER BOLT