GE AMX-4+ Technical Manual page 38

GE MEDICAL SYSTEMS
REV 5
Left Mounting Plate Assembly
ILLUSTRATION 3-3
LEFT MOUNTING PLATE ASSEMBLY
DECAL
10-32 X .500 HEX SOCKET
FLAT HEAD CAPSCREW
10. Remove decal from cover on end of left tube support to access the cover mount
ing screws.
11. Remove four screws holding cover to mounting plate shaft.
12. Remove two spring washers, disk and thrust washer from mounting plate shaft.
13. Slide shaft, thrust washer, dowel pin, disk, and mounting plate from left tube sup
port.
14. Remove thrust washer and dowel pin from shaft.
15. Remove four screws holding shaft and disk to mounting plate.
16. Remove shaft and disk from mounting plate.
17. Remove eight hex socket flat head capscrews holding right and left tube support
arms to mounting plate.
18. Remove tube supports.
COVER
DISC
THRUST WASHER
3-4
(MODEL 2169360, 2236420 & 2275938 SERIES)
DIRECTION 2173225-100
1/4-20 X .625 HEX SOCKET
FLAT HEAD CAPSCREW
1/4-20 X .500 HEX SOCKET FLAT
HEAD CAPSCREW
LEFT TUBE SUPPORT
SPRING
WASHER
DOWEL PIN
SHAFT
DISK
MOUNTING PLATE
10-32 X .500 HEX SOCKET
FLAT HEAD CAPSCREW
AMX-4+ SERVICE