GE AMX-4+ Technical Manual page 103

GE MEDICAL SYSTEMS
REV 5
ILLUSTRATION 7-9
MOTOR & BRAKE ASSEMBLY
SPRING
MOTOR MOUNT
NOTCH ON
THIS SIDE
5. Carefully remove spring between base assembly and spring pin on motor mount
plate. See Illustration 7-9.
6. Remove nut and bolt holding motor mount to base.
7. Remove drive belt from motor pulley.
8. Remove motor and brake assembly.
9. Remove capscrews and washers holding motor to motor mount plate.
10. Remove binding head screws attaching brake to motor.
DRIVE MOTOR
BRAKE
WASHERS
(MODEL 2169360, 2236420 & 2275938 SERIES)
BRAKE
DRIVE MOTOR
7-9
AMX-4+ SERVICE
DIRECTION 2173225-100
MOTOR MOUNT
NOTCH ON
THIS SIDE
SPRING
MOTOR
MOUNT
BOLTS