Registration Roller Solenoid (Sl2); Precaution For Reinstallation - Xerox Phaser 6120 Service Manual

Registration Roller Solenoid (SL2)

1. Remove the Right Cover. See
2. Remove the Power Supply Cooling Fan Motor Assy. See
3.
Disconnect the connector, remove the screw [1], and remove the Registration Roller
Solenoid [2].

Precaution for Reinstallation

Confirm that the registration roller solenoid is securely seated on the location pins,
before securing screw [1] to the chassis.
Reinstall the solenoid so that the clearance between the gear of the registration roller
clutch and flapper falls within the specified range.
Specifications: 1.0 ± 0.2 mm
Phaser® 6120 Color Laser Printer Service Manual
Right Cover on page 5-6.
[2]
[1]
4139fs2051c1
4139fs2067c1
5-33
Disassembly/Assembly Procedures
Power Unit (PU) on page 5-14.