Using The Trigger Function - Teledyne T3MIL50 User Manual

1. Toggle Dry mode
on or off

Using the Trigger Function

Background
1. Select Manual
Trigger
2. Manually
Triggering
Measurements
36
Press the key to toggle the dry circuit
Dry
measurement mode on or off.
The DRY function indicator will appear in the middle of
the display when active.
Dry Circuit measurement
mode indicator
The T3MIL50/50X can use internal or manual triggering
for the Resistance, Temperature, Temperature
Compensation, Temperature Conversion, Binning,
Handler and Scan modes.
By default the T3MIL50/50X is set to internal triggering
mode.
Short press
Trigger
The Ext indicator will be shown on the display when the
manual trigger is active.
Short press the
Trigger
single measurement (when in the manual mode).
T3MIL Series User Manual
to switch to manual triggering mode.
Trigger source
key each time you want to start a