Calculate:compare:limit:lower; Calculate:compare:limit:upper - Teledyne T3MIL50 User Manual

Syntax
Query Syntax
Parameter/
Return parameter
Example

CALCulate:COMPare:LIMit:LOWer

Description
Syntax
Query Syntax
Parameter
Return parameter
Example
Note

CALCulate:COMPare:LIMit:UPPer

Description
CALCulate:COMPare:LIMit:MODE {ABS|DPER|PER}
CALCulate:COMPare:LIMit:MODE?
ABS
DPER
PER
CALC:COMP:LIM:MODE ABS
Sets test results as absolute values for the compare
function.
Sets or returns the lower limit value for the compare
function.
CALCulate:COMPare:LIMit:LOWer {<NRf>[,<String>]}
CALCulate:COMPare:LIMit:LOWer?
<NRf>
<String>
<NR3>
CALC:COMP:LIM:LOW 0.95,kohm
Sets the lower limit value to 0.95kΩ.
CALC:COMP:LIM:LOW?
>0.9500E+3
Returns the lower limit as 0.95kΩ.
This command is only applicable when compare mode is
set to ABS for compare function.
Sets or returns the upper limit value for the compare
function.
COMMAND OVERVIEW
The test results are judged from
absolute values.
The test results are judged from a
reference value ± a percentage offset.
(delta percentage)
The test results are displayed as a
percentage of the reference value.
000.0000~999.9999
mohm/ohm/kohm/maohm,unit
If the unit is not set, the unit will be
automatically set by the present range.
000.0000~999.9999E± X
Set
Query
Set
Query
103