Temperature Commands; Temperature:state; Temperature:data - Teledyne T3MIL50 User Manual

Temperature Commands

TEMPerature:STATe

Description
Syntax
Query Syntax
Parameter/
Return parameter
Example

TEMPerature:DATa

Description
Query Syntax
Return parameter
Example
Sets or returns the temperature function state.
TEMPerature:STATe {<NR1>|OFF|ON}
TEMPerature:STATe?
<NR1>
OFF
ON
TEMP:STAT ON
Sets the TEMP (Ohm+T) function on.
Returns the PT-100 sensor temperature measurement in
degrees Celsius.
TEMPerature:DATa?
<NR3>
TEMP:DAT?
>0.250E+2
Returns the temperature as 25ºC.
COMMAND OVERVIEW
0:OFF
1:ON
Turn the temp function off.
Turn the temp function on.
-50.0~399.9
Set
Query
Query
115