Temperature Measurement - Teledyne T3MIL50 User Manual

Temperature Measurement

Background
Note
1. Select the
Temperature
function
2. Select the
temperature units
The temperature measurement function uses a PT-100
temperature probe. The measured temperature is
displayed on the display. For more information on the
PT-100 sensor, see the appendix on page 141.
There is only one range for the temperature function.
However the resistance measurement range can still be
changed when in the temperature function.
The temperature measurement function is used in
conjunction with the Ohm measurement function. The
two measurements share the same display, so the Ohm
readings stay on the display even after the temperature
measurement function is activated. Thus when the
Temperature function is selected, "Ohm+T" is shown as
the selected function.
Press to enter the temperature measurement
TEMP
function.
Temperature + Ohm
function indicator
The temperature is displayed on the Ohm display.
From the bottom menu, go to Meas. Setup>Temperature
Unit and select ºC or ºF.
See page 60 for setting details.
MEASUREMENT
Resistance measurement
(Ambient)
temperature
source
Ambient
temperature
47