Brightness - Teledyne T3MIL50 User Manual

2. Interface setting
appears
Note

Brightness

Background
1. Select Brightness
setting
2. Brightness
setting appears
Use the arrow keys to choose an interface and to set the
baud rate (RS232). The EOL (end of line) character can
also be set. Press Enter to confirm the settings.
Interface
Interface
DATA OUT
EOL
 Pressing ESC before pressing ENTER will exit from the
Interface settings.
 After DATA OUT is turned on, the measured value will
be automatically sent back, via communicating
interface, to the connected PC.
 The DATA OUT function is only available when Trigger
Mode is selected in EXT.
The Brightness setting sets the backlight brightness of
the TFT-LCD panel.
From one of the main screens, press
the ESC key so that the menu
system at the bottom of the display
has focus.
Go to System and press Enter.
Go to Utility and press Enter.
Go to Brightness and press Enter.
Use the arrow keys to set the brightness level. Press
Enter to confirm the setting.
RS232, Baud Rate (1200, 2400, 4800,
9600, 19200, 38400, 57600, 115200)
USB
ON, OFF
LF, CR, CR+LF, LF+CR (default = LF)
See page 94 for further details.
MEASUREMENT
System
menu icon
Move
Select menu
Enter
or setting
65