Configure Rs-232 Interface - Teledyne T3MIL50 User Manual

Configure RS-232 Interface

Background
Settings
Connect the Type A-B USB cable to the
rear panel USB B port on the
T3MIL50/50X. Connect the other end to
the Type A port on the PC.
Go to the Windows Device Manager.
For Windows 7 go to:
Start Menu > Control Panel > Hardware and Sound >
Device Manager
The T3MIL50/50X will appear as an unknown Virtual
Com Port under "Other Devices".
Right-click Other Devices and select "Update Driver
Software".
Select "Browse my computer for driver software" and
select the driver previously downloaded from the
Teledyne LeCroy website.
The T3MIL50X and the COM port that it is assigned to
will now appear in under the Ports (COM & LPT) node.
The T3MIL50/50X can also use an RS-232C connection
for remote control. When connecting to a PC ensure the
correct baud rate, parity, data bits, stop bit and data
control settings are used.
Baud rate 1200, 2400, 4800, 9600, 19200, 38400,
57600, 115200
Parity None
Data bits 8
Stop bit 1
Data flow None
control
HANDLER/SCAN INTERFACE
85